FUTURE-BOT COMPONENTS  FUTURE-BOT COMPONENTS  FUTURE-BOT COMPONENTS

 Mail Home


DC GEAR MOTORS


Various Motors.

NOTE: These motors are surplus, Quantity are limited, E-mail me to check quantitys in stock..



HD - Harmonic Drive Systems motors RH-14-6002 with encoders,
HD - Harmonic Drive Systems motors Used tested a RH-14-6002 with encoders, real easy interface all encoder data on the motors, from 6 to 24 volts, @ 1.8 amps.
These motors cost over $785.00 each from Japan HD Systems. All tested, " Photo is typical of what you get", all tested, 30 day warrenty USA..
RH-14-6002 manual

Part# SOLD OUT


SALE ____This is a Globe #409A582 DC Gearhead Motor____SALE.
They are BRAND NEW items. These would be great for ROBOTICS, or even BATTLEBOTS, very strong motors. Globe Motors # 409A582 Precision Gearhead motor equipped with an electric brake and a tach or positioning sensor. Brake must be energized to allow motor to rotate. Use of the brake enables precision starting and stopping rated at 12 volts 0.2 amps. Brake can be easily disconnected if not required. Motor rated at 12 Vdc, brake at 24 Vdc. No load rating: 25 RPM @ 12 Vdc @ 130 ma with 400 ounce /inches or torque. Load speed is 17 RPM @ 12 volt 1.5 amps, stall torque is 1350 ounce /inch torque, motor functions well from 6 to 24 Vdc. Overall size, excluding shaft, 5.15" long x 1.52" diameter. 0.25" diameter x 0.9" long shaft equipped with a press-fit gear 20 tooth that be removed to fit your applications. Threaded 4 mounting holes on Gearhead face 32 UNC and are spaced 3/4' on center apart. NOTES ON THE TACH SENSOR The tach sensor is a Honeywell SS443A. Datasheet available at: honeywell. The connection sequence and color code for the wires on the sensor is: Orange = Sensor +V (+5V works fine) Blue = Sensor ground Brown = Sensor open-collector output (Honeywell recommends 10K pull-up to +5V for driving TTL gates.) white wires are for brake, red and black wire for motor power.
Part# FBC-LGMOTOR1 $SOLD OUT each NEW
.


SOLD OUT...These would be great for ROBOTICS, or CNC X,Y,Z, Axis very strong gear box . Globe Motors # 409A582 Precision gearhead motor equipped with an electric brake and a tach or positioning sensor. Brake must be energized to allow motor to rotate. Use of the brake enables precision starting and stopping rated at 12 volts to 24 volts 0.2 amps. Brake can be easily disconnected if not required.
Motor rated at 12 Vdc but will work from 6 to 24 volts, brake at 24 Vdc. No load rating: 25 RPM @ 12 Vdc @ 130 mA with 400 ounce /inches or torque. Load speed is 17 RPM @ 12 volt 1.5 amps, stall torque is 1350 ounc /inch torque, motor functions well from 6 to 24 Vdc. Overall size, excluding shaft, 5.15" long x 1.52" diameter. 0.25" diameter x 0.9" long shaft equipped with a press-fit gear 20 tooth that be removed to fit your applications. Threaded 4 mounting holes on gearhead face 32 UNC and are spaced 3/4' on center apart. Secondary torque: 125 in-lb Output face: 5 5/8 dia. Dual bearing output spindle design. Beefy main output bearing is 3.937" dia. Main bearing rubber seal and flange seal for operation with machining coolant.
NOTES ON THE TACH SENSOR The tach sensor is a Honeywell SS443A. Datasheet available at: honeywell. The connection sequence and color code for the wires on the sensor is: Orange = Sensor +V (+5V works fine) Blue = Sensor ground Brown = Sensor open-collector output (Honeywell recomends 10K pull-up to +5V for driving TTL gates.) white wires are for brack, red and black wire for motor power.
Part# FBC-LGMOTOR2 SOLD OUT- I HOPE TO FIND SOME MORE


Powerful Small Gear Box
A Powerful Small Gear Box
A Robotics 1.5 to 12 volt brushed DC motor and gearbox, has 0.125 inch shaft and a 0.70 dia pressed on hub with a 0.90 pin. Rated @ 6 volts DC 60ma no load at about 60 RPM. Has 3 mount holes on gear box and 2 power connection wires. Motor is metal construction, Gear box is Hi impact plastic, very strong with steel/bronze/plastic gears. The main drive gear is steel for durability. Factory partnumber is 94F9187
Part# FBC-SMMOTOR1
$15.00 NEW

TO BUY 1 motor click here
TO BUY 2 motors click here

If you need more than 2 motors or you are out of the USA please email me to place an order.

Robotics Gear Box
Great robotics drive gearbox, reversable 3 -12V DC gear motor. 100 RPM @ 6 VDC. Size L=2.25 x W=1.125, has 3mm dia x 19 mm shaft with slight serriations, plastic internal gears, solder terminals.
Part# FBC-GBOX2
$15.00 ea

TO BUY 1 motor click here
TO BUY 2 motors click here

If you need more than 2 parts or you are out of the USA please email me to place an order.

Robotics Gear Box with optical Encoders


Great robotics drive gearbox X and Y axes. 2 reversable 3 -12V DC gear motors.
2 OakGrigsby optical encoders. 2 limit swiches. 1 optica limit switch. 1 rotor shaft full contact 12 contact commuter.
Size L=6.0 inches x W=4.0 inches x 2 inches thick.
Part# FBC-GBOX3
SOLD OUT

Future-Bot Components
Disclamer
© 1985 - 2012 Future-Bot Components